Don't Get Burned By Cables... Literally!

Published Thursday, May 4, 2017 12:00 pm

It can be hard to ante up for a quality Lightning or USB-C cable when just a little searching reveals cables that cost only a couple of bucks each. “Surely,” you might think, “the cheap cables might not be as good, but so what if they wear out sooner?”

Points for frugality, but this is one place you don’t want to skimp too far. With some types of cables, the worst that could happen is that the cable would stop working. But with any cable that carries power, like Lightning cables for iOS devices, a short could cause sparks, smoke, and even a fire. This isn’t a crazy concern: there have been numerous reports over the years of fires started by charging smartphones, both iPhones and models from other manufacturers. Apple even has a page that helps you identify counterfeit or uncertified Lightning cables.

If you have a MacBook or MacBook Pro with USB-C ports, fire hasn’t been an issue, but bad cables have been. In 2015 and 2016, Benson Leung, an engineer at Google, made it his mission to identify out-of-spec USB-C cables after a bad USB-C cable fried his Chromebook Pixel laptop. To summarize his findings, stick with cables sold by name-brand manufacturers like Apple, Anker, and Belkin—others may be fine, but you’ll need to do research to be certain.

With Lightning cables, the same advice applies—buy cables only from well-known manufacturers like the ones mentioned above. You’ll pay a little more, but the cables will not only likely last longer, they’ll be less likely to damage your iPhone or iPad, or burn down your house.

Of course, any cable, if sufficiently mistreated, can short out and cause problems. Follow this advice to protect your devices from cable-related issues:

  • When coiling your cables, avoid wrapping them tightly around something. A tight wrap can cause kinks that will degrade the wires inside.
  • Don’t create sharp bends in the cable, especially near the connector. Sharp bends can eventually break the insulation and reveal the wires inside.
  • When unplugging your device, pull from the plug instead of the cord. That avoids stress near the connector.
    
  • Keep the Lightning connector’s pins clean and away from liquids; crud or a drop of water on the pins could cause a short circuit. USB-C cables are less susceptible to such problems because of their metal jackets, but still be careful.
  • If a cable’s insulation ever breaks such that you can see the wires inside, wrap it with electrical tape right away, and replace it as soon as you can.

Don’t freak out about cable safety—although there have been problems, hundreds of millions of people have never experienced any trouble at all. But it’s still worth buying quality cables and taking good care of them.


MacCafé Specials 

Used Mac Pro (2013)
3.5 GHz 6-core, 16 RAM, 256 Flash/SSD
$2515
 
Used Xserve  (2009)
2.26 Quad-core, 9 GB RAM, 2 x 1TB drives, Raid option, rackmount
$275


AudioEngine Powered Speakers
   HD6 Black - $525 --- save $224
   A5+ BLK/WHT - $350 --- save $49
   A2+ BLK/WHT - $199 --- save $50

Focal XS 2.1 Near Field Speaker System

now $349 --- save $250

iPhone cases up to 50% off

 Check out our Sales page for more deals!

12/27/2017: Did you know that Apple Pay updates your credit card details automatically?

File this as reason number 17 why Apple Pay is better than plastic. Let’s say your credit card expires and your bank sends you a new card with a revised expiration date. Or perhaps your bank replaces your card with one that has a new number. Either way, most credit card issuers automatically update the credit card expiration date and number in Apple Pay so you don’t have to make those changes yourself. (If your bank doesn’t do this, you’ll have to remove the old card and add the new one.) However, if you move or change your billing address, you’ll need to update that info yourself: in iOS, go to Settings > Wallet & Apple Pay; in macOS on a MacBook Pro with Touch ID, go to System Preferences > Wallet & Apple Pay.

 

More Tips